The quality of shelf products is a problem that many customers are very concerned about, many customers in the purchase of shelves, the quality control of products is very strict, our company strives to improve the quality to the extreme, in every link of excellence.
Drawing design
Warehouse shelves should not only be beautiful and generous, but also easy to use and easy to install, then the design of drawings needs certain requirements, DI-AO storage equipment has a professional team of designers, each designer has rich experience in the design of shelf drawings and knows the needs of customers, can provide customers with a variety of design drawings for choice, so that customers no longer worry. The designer considered these aspects in the design drawings:
1. The size of the shelves should be accurate, such as height, depth, width, etc., taking into account the actual situation of the warehouse. And the drawings of each shelf manufacturer are different, which requires our designers to pay attention to every detail.
2. When the drawings are designed, it will be taken into account whether the shelves of the warehouse will be damaged during transportation. If you can't do this, you will be prone to problems during production.
3. The load-bearing capacity of the shelves will be taken into account when the drawings are designed, and the bearing capacity cannot be less than 500 KG, if this weight cannot be reached, then there will be potential safety hazards.
4. The installation problem will be taken into account when the drawing is designed. If the shelves are not installed firmly enough, problems such as paint loss and screw loss will occur.
5. The safety of the shelves will be taken into account when the drawings are designed, such as whether the shelves may fall during the handling process, and whether they are easy to be found after falling.

Material selection

The quality of shelf materials is directly related to the quality of shelf products, so it is very important to select materials to ensure the quality of shelf products. DI-AO storage equipment has always adhered to the tenet of "quality first", using high-quality raw materials for production, to meet the needs of customers, so that customers can reduce unnecessary costs and harvest high-quality shelf products.

1. Our factory first looks at whether the shelf materials meet the national standards. At present, there are two main shelf industry standards, one is "cold-rolled steel plate for metal products" (GB/T4100), and the other is "cold-rolled steel plate for non-ferrous metal products" (GB/T4300).

2. Secondly, we will pay attention to the surface treatment of shelf materials, and the commonly used surface treatment methods are spraying and plastic spraying and galvanizing, because the cost of spraying technology is relatively high, so most enterprises use plastic spraying and spraying galvanizing. The choice of spraying or spraying galvanizing is mainly based on the customer's budget, and it is more cost-effective to spray plastic spraying and spraying galvanizing.

Processing

When processing the shelf, our factory will pay attention to several aspects, first of all, the thickness of the plate, when the shelf is made, the plate needs to be cut, if the plate is too thin, then it will be easy to deform in the later processing. The second is the spraying of the shelf, whether the color of the spraying meets the requirements of the customer, and whether the color of the spray is uniform. In the process of processing, DI-AO storage equipment strives for excellence in processing, and if there are some small problems or small mistakes, they will be modified or corrected in time. Because the employees at DI-AO Warehouse Equipment have always adhered to the principle that small problems can have serious consequences, they are particularly rigorous in this aspect of processing, just to reassure customers who buy products.

Assembling

Assembly is a complete shelf production process, and a good assembly method can ensure product quality. Our staff of DI-AO Storage Equipment Co., Ltd. will first check whether the product is welded when assembling, which will lead to deformation if the welding is not good, and then check the quality of the product, including whether its connection is firm, how the bearing capacity is, whether there will be loosening, and then check whether the distance between the shelves is appropriate.

Inspection

DI-AO's warehouse inspectors will conduct random inspections of raw materials and parts, as well as the welding and surface treatment of parts. In addition, the compressive performance of the shelves is checked. The inspection of the shelf is mainly the inspection of the structure and quality of the shelf, including the load-bearing capacity, assembly method, installation difficulty, etc. During the structural inspection, the welding part will also be checked for porosity, undercut and other phenomena, and if necessary, it will be polished to ensure that the surface is smooth and flat. When the assembly method is inspected, the structure of the shelf will also be checked for looseness, deformation, etc., and if necessary, it will also be reinforced.